因为密码是明文显示的，最好能修改文件权限，使root作为owner和chmod 700
vi /etc/modules.conf
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-18 ppp_mppe_mppc
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate |
重新启动
在我这里 alias ppp-compress-18 ppp_mppe_mppc 好像没用，只好手动加载：
确认内核支持
strings `which pppd`|grep -i mppe|wc --lines
30
###大于等于30就行#####
[strings `which pppd`|grep -i mppc|wc --lines
7
#### 不为 0 #####
dmesg | grep MPPE
MPPE/MPPC encryption/compression module registered |
启动pptpd
# /usr/local/sbin/pptpd
Mar 17 23:07:32 localhost pptpd[4471]:
MGR: Manager process started
Mar 17 23:07:32 localhost pptpd[4471]:
MGR: Maximum of 10 connections available |
设置客户端连接，“安全”里面选择自定义，如图所示，这里取决于你在option.pptpd里面的设置：
Mar 17 23:09:59 localhost pptpd[4473]:
CTRL: Client 192.168.1.136
control connection started
Mar 17 23:09:59 localhost pptpd[4473]:
CTRL: Starting call
(launching pppd, opening GRE)
Mar 17 23:09:59 localhost pppd[4474]:
pppd 2.4.3 started by root, uid 0
Mar 17 23:09:59 localhost pppd[4474]:
Using interface ppp0
Mar 17 23:09:59 localhost pppd[4474]:
Connect: ppp0 <--> /dev/pts/1
Mar 17 23:10:02 localhost pptpd[4473]:
CTRL: Ignored a SET LINK INFO
packet with real ACCMs!
Mar 17 23:10:02 localhost pppd[4474]:
MPPC/MPPE 128-bit stateless compression enabled
Mar 17 23:10:04 localhost pppd[4474]:
found interface eth0 for proxy arp
Mar 17 23:10:04 localhost pppd[4474]:
local IP address 192.168.1.3
Mar 17 23:10:04 localhost pppd[4474]:
remote IP address 192.168.1.230 |
成功！
除了那个红色的一行外，不知是何原因？
